Skip to content
HydraulicPressureTestPumpLPP700

Hydraulic Pressure Test Pump LPP 700

SKU : HPLRLP700
MAKE : LR CAL
MODEL : LPP 700
AVAILABILITY : IN STOCK
LR Cal
AED 0.00 - AED 0.00
AED 0.00
AED 6,000.00
AED 6,000.00 - AED 6,000.00
AED 6,000.00
(Including VAT)

Hydraulic Pressure Test Pump LPP 700

The pressure test pump LR-Cal LPP 700 is used to generate pressure for checking, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements. These pressure tests may be carried out in laboratories, workshop or on site at the measuring point.

If the instrument to be tested and a sufficiently accurate reference measuring instrument are connected up to the test pump, the same pressure is applied to the two measuring instruments when the pressure test pump LR-Cal LPP 700 is operated. By comparing the two measure valuses at random pressure values, the accuracy can be verified or the instrument under test can be adjusted.

Despite its compact dimensions, the pressure test pump LR-Cal LPP 700 is easy to operate and allows for exact generation of the required test pressures The LR-Cal LPP 700 is fitted with a fine adjustment valve for a precise adjustment of pressures.

The reference instrument is screwd directly on the top of the pump and the unit under test is connected by means of the connection tube incorporating an adapter 1/4" BSP female thread (freely rotating), contained in the scope of delivery.

Hydraulic Pressure Test Pump
Pressure generation 0 to 700 bar = 0 to 10,152 psi
Pressure ports
(standard version)		 For reference instrument (on the top of the pump):
1/2" BSP female (freely rotating), with integr. O-ring
For test item (at the test hose):
1/4" BSP female (freely rotating), with integr. O-ring
This connection is made via an adapter, at the pump is a MINIMESS 1620 port.
Materials Aluminium, brass, ABS, Plexiglas, NBR
Priming pressure Hand lever
High pressure Switch-over knob, reduced lever stroke
Pressure fine adjustment Fine volume adjuster (with large volume)
Operating media Mineral oil based hydraulic fluid or destilled water, like used for flat irons (e.g. from local super market)
Fluid reservoir Volume > 200 cm³, can be filled during stroking
Dimensions approx. 270 x 160 x 120 mm (without test hose)
Weight approx. 1.3 kg (without test hose)
Order-Code LPP-700
Datasheet : Download
User Manual : Download

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Hydraulic Pressure Test Pump LPP 700

The pressure test pump LR-Cal LPP 700 is used to generate pressure for checking, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements. These pressure tests may be carried out in laboratories, workshop or on site at the measuring point.

If the instrument to be tested and a sufficiently accurate reference measuring instrument are connected up to the test pump, the same pressure is applied to the two measuring instruments when the pressure test pump LR-Cal LPP 700 is operated. By comparing the two measure valuses at random pressure values, the accuracy can be verified or the instrument under test can be adjusted.

Despite its compact dimensions, the pressure test pump LR-Cal LPP 700 is easy to operate and allows for exact generation of the required test pressures The LR-Cal LPP 700 is fitted with a fine adjustment valve for a precise adjustment of pressures.

The reference instrument is screwd directly on the top of the pump and the unit under test is connected by means of the connection tube incorporating an adapter 1/4" BSP female thread (freely rotating), contained in the scope of delivery.

Hydraulic Pressure Test Pump
Pressure generation 0 to 700 bar = 0 to 10,152 psi
Pressure ports
(standard version)		 For reference instrument (on the top of the pump):
1/2" BSP female (freely rotating), with integr. O-ring
For test item (at the test hose):
1/4" BSP female (freely rotating), with integr. O-ring
This connection is made via an adapter, at the pump is a MINIMESS 1620 port.
Materials Aluminium, brass, ABS, Plexiglas, NBR
Priming pressure Hand lever
High pressure Switch-over knob, reduced lever stroke
Pressure fine adjustment Fine volume adjuster (with large volume)
Operating media Mineral oil based hydraulic fluid or destilled water, like used for flat irons (e.g. from local super market)
Fluid reservoir Volume > 200 cm³, can be filled during stroking
Dimensions approx. 270 x 160 x 120 mm (without test hose)
Weight approx. 1.3 kg (without test hose)
Order-Code LPP-700
Datasheet : Download
User Manual : Download

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

YOU MAY ALSO LIKE

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare