تخطى الى المحتوى
استمتع بتجربة موقعنا الإلكتروني المتكامل حديثًا، والمصمم لتعزيز رحلة التسوق الخاصة بك باستخدام أحدث التقنيات والميزات سهلة الاستخدام.
cGas Detector IR Refrigerant Transmitter R227EA Sensor

cGas Detector IR Refrigerant Transmitter R227EA Sensor

يصنع : CRITICAL ENVIRONMENT TECHNOLOGIES
نموذج : CGAS-D-IR227EA
ضمان : 1 Year
التوفر : في الأوراق المالية
Critical Environment Technologies
AED 6,200.00 - AED 6,200.00
AED 6,200.00
AED 6,200.00 - AED 6,200.00
AED 6,200.00
(بما في ذلك ضريبة القيمة المضافة)

cGas Detector IR Refrigerant Transmitter R227EA Sensor

The cGas Detector IR Refrigerant R227EA sensor provides continuous monitoring of a wide range of refrigerant gases commonly used in commercial refrigeration systems. Dual beam, non-dispersive infrared sensor technology overcomes the limitations of solid state refrigerant sensors, accurately detects refrigerant gases without cross interference from toxic or combustible gases and is low maintenance with a longer lifespan. Choose from many types of refrigerant gas sensors commonly used in commercial refrigeration systems, including A2L refrigerants, SF6 and CO2 (R744). True Plug & Play Smart Sensor technology makes replacing sensors quick and easy.

The cGas Detector IR Refrigerant R227EA sensor is available with analog output or digital output and comes with a relay and internal audible alarm. Powered by 24 VDC or ground referenced AC, it has an LCD display, temperature compensation, thermal resetting fuse and the firmware and configuration can be upgraded in the field using the USB connection. It comes in a standard water / dust tight, corrosion resistant ABS/ polycarbonate enclosure with a hinged, secured door. With the optional, factory installed splash guard the enclosure is IP54 rated and provides protection in water spray or wash down applications.

Complies with refrigeration safety codes ASHRAE No 15-2001 Mechanical Standard and B-52 Code.

Key Features

  • Accurate, low level leak detection
  • Long life, non-dispersive infrared refrigerant sensor, dual beam technology
  • Easy Plug & Play Smart Sensor replacement at end of life, comes pre-calibrated
  • One linear 4-20 mA or 0-10V analog output or field configurable BACnet® MS/TP RS-485 or Modbus® RTU RS-485 digital output signal to a BAS
  • 1 SPDT relay rated 30 volts, 2 amp max
  • Internal audible alarm rated 90 dB @10 cm/4 in
  • 24 VDC or VAC power (ground reference)
  • Bright LCD display
  • USB port for configuration changes and firmware upgrades
  • Standard water / dust tight, corrosion resistant enclosure (drip proof); IP54 rated with optional splash guard (Option -S) installed
  • RoHS compliant circuit boards

Applications

  • Supermarkets
  • Convenience Stores
  • Grocery Stores
  • Refrigerated Mechanical Rooms
  • Commercial Chiller Equipment Rooms
  • Food Storage / Cold Storage Rooms
  • Walk-in Freezers
  • Food Processing Plants
  • Food Service Facilities
Target Gas

 Infrared R227EA refrigerant (0-2,000 ppm)

 

Enclosure ABS/polycarbonate, IP54 rated with splash guard; corrosion-resistant with RF interference-reducing copper-coated interior.
Weight

 400 g (14 oz)

 

Size

 127 x 127 x 76 mm (5.0 x 5.0 x 3.0 inches)

 

Power Requirement

 16-30 VDC, 3W; 12-27 VAC, 50-60 Hz, 3 VA

 

Operating Temperature

 0°C to 40°C (32°F to 104°F); with low-temperature package, -40°C to 40°C (-40°F to 104°F)

 

Operating Humidity

 15% - 85% RH non-condensing

 

Digital Output

 BACnet® MS/TP RS-485 or Modbus® RTU RS-485 (user configurable in the field)

 

Relay & Buzzer

 1 SPDT relay rated 30 volts, 2 amps, with an internal buzzer rated 90 dB @ 10 cm

 

Certifications Conforms to CSA-C22.2 No. 205-12, UL508, EMC Directive 2014/30/EU, EN 50270, 2015; RoHS compliant circuit boards.
  • Calibration Adapter Clip (CET-SGC): Designed for use with the optional splash guard to facilitate calibration.
  • Calibration Kit (CET-715A-CK1): Suitable for various cylinder sizes, includes a 0.5 LPM flow regulator and adapter.
  • Protective Guard (SCS-8000-RSG): A small, 16-gauge metal guard that provides protection for the sensor in harsh environments.
  • Splash Guard (SCS-8000-WSG): Offers additional protection against water spray for increased durability in wash-down applications.
Datasheet : Download
User Manual : Download

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

How does the cGas Detector handle integration with building management systems?

The detector features digital output options with BACnet® MS/TP RS-485 or Modbus® RTU RS-485 communication, making it easy to integrate with various building management systems.

Is the sensor easy to replace?

Yes, it uses plug-and-play, pre-calibrated sensors that can be easily replaced, ensuring minimal downtime.

Does the detector provide real-time refrigerant monitoring?

Yes, the built-in LCD display shows real-time R227EA refrigerant levels, ensuring continuous leak detection and monitoring.

Can the detector operate in low-temperature environments?

Yes, with the optional low-temperature package, the detector can operate effectively in conditions as cold as -40°C.

What power supply does the detector require?

It operates on 16-30 VDC or 12-27 VAC, making it versatile for different installation requirements.

How is the detector protected in harsh environments?

The detector has an IP54-rated ABS/polycarbonate enclosure, and the optional splash guard provides additional protection against water and dust. 

cGas Detector IR Refrigerant Transmitter R227EA Sensor

The cGas Detector IR Refrigerant R227EA sensor provides continuous monitoring of a wide range of refrigerant gases commonly used in commercial refrigeration systems. Dual beam, non-dispersive infrared sensor technology overcomes the limitations of solid state refrigerant sensors, accurately detects refrigerant gases without cross interference from toxic or combustible gases and is low maintenance with a longer lifespan. Choose from many types of refrigerant gas sensors commonly used in commercial refrigeration systems, including A2L refrigerants, SF6 and CO2 (R744). True Plug & Play Smart Sensor technology makes replacing sensors quick and easy.

The cGas Detector IR Refrigerant R227EA sensor is available with analog output or digital output and comes with a relay and internal audible alarm. Powered by 24 VDC or ground referenced AC, it has an LCD display, temperature compensation, thermal resetting fuse and the firmware and configuration can be upgraded in the field using the USB connection. It comes in a standard water / dust tight, corrosion resistant ABS/ polycarbonate enclosure with a hinged, secured door. With the optional, factory installed splash guard the enclosure is IP54 rated and provides protection in water spray or wash down applications.

Complies with refrigeration safety codes ASHRAE No 15-2001 Mechanical Standard and B-52 Code.

Key Features

  • Accurate, low level leak detection
  • Long life, non-dispersive infrared refrigerant sensor, dual beam technology
  • Easy Plug & Play Smart Sensor replacement at end of life, comes pre-calibrated
  • One linear 4-20 mA or 0-10V analog output or field configurable BACnet® MS/TP RS-485 or Modbus® RTU RS-485 digital output signal to a BAS
  • 1 SPDT relay rated 30 volts, 2 amp max
  • Internal audible alarm rated 90 dB @10 cm/4 in
  • 24 VDC or VAC power (ground reference)
  • Bright LCD display
  • USB port for configuration changes and firmware upgrades
  • Standard water / dust tight, corrosion resistant enclosure (drip proof); IP54 rated with optional splash guard (Option -S) installed
  • RoHS compliant circuit boards

Applications

  • Supermarkets
  • Convenience Stores
  • Grocery Stores
  • Refrigerated Mechanical Rooms
  • Commercial Chiller Equipment Rooms
  • Food Storage / Cold Storage Rooms
  • Walk-in Freezers
  • Food Processing Plants
  • Food Service Facilities
Target Gas

 Infrared R227EA refrigerant (0-2,000 ppm)

 

Enclosure ABS/polycarbonate, IP54 rated with splash guard; corrosion-resistant with RF interference-reducing copper-coated interior.
Weight

 400 g (14 oz)

 

Size

 127 x 127 x 76 mm (5.0 x 5.0 x 3.0 inches)

 

Power Requirement

 16-30 VDC, 3W; 12-27 VAC, 50-60 Hz, 3 VA

 

Operating Temperature

 0°C to 40°C (32°F to 104°F); with low-temperature package, -40°C to 40°C (-40°F to 104°F)

 

Operating Humidity

 15% - 85% RH non-condensing

 

Digital Output

 BACnet® MS/TP RS-485 or Modbus® RTU RS-485 (user configurable in the field)

 

Relay & Buzzer

 1 SPDT relay rated 30 volts, 2 amps, with an internal buzzer rated 90 dB @ 10 cm

 

Certifications Conforms to CSA-C22.2 No. 205-12, UL508, EMC Directive 2014/30/EU, EN 50270, 2015; RoHS compliant circuit boards.
  • Calibration Adapter Clip (CET-SGC): Designed for use with the optional splash guard to facilitate calibration.
  • Calibration Kit (CET-715A-CK1): Suitable for various cylinder sizes, includes a 0.5 LPM flow regulator and adapter.
  • Protective Guard (SCS-8000-RSG): A small, 16-gauge metal guard that provides protection for the sensor in harsh environments.
  • Splash Guard (SCS-8000-WSG): Offers additional protection against water spray for increased durability in wash-down applications.
Datasheet : Download
User Manual : Download

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

How does the cGas Detector handle integration with building management systems?

The detector features digital output options with BACnet® MS/TP RS-485 or Modbus® RTU RS-485 communication, making it easy to integrate with various building management systems.

Is the sensor easy to replace?

Yes, it uses plug-and-play, pre-calibrated sensors that can be easily replaced, ensuring minimal downtime.

Does the detector provide real-time refrigerant monitoring?

Yes, the built-in LCD display shows real-time R227EA refrigerant levels, ensuring continuous leak detection and monitoring.

Can the detector operate in low-temperature environments?

Yes, with the optional low-temperature package, the detector can operate effectively in conditions as cold as -40°C.

What power supply does the detector require?

It operates on 16-30 VDC or 12-27 VAC, making it versatile for different installation requirements.

How is the detector protected in harsh environments?

The detector has an IP54-rated ABS/polycarbonate enclosure, and the optional splash guard provides additional protection against water and dust. 

YOU MAY ALSO LIKE

قارن بين المنتجات

{"one"=>"حدد 2 أو 3 عناصر للمقارنة", "other"=>"تم اختيار {{ count }} من 3 عناصر"}

حدد العنصر الأول للمقارنة

حدد العنصر الثاني للمقارنة

حدد العنصر الثالث للمقارنة

يقارن