تخطى الى المحتوى
استمتع بتجربة موقعنا الإلكتروني المتكامل حديثًا، والمصمم لتعزيز رحلة التسوق الخاصة بك باستخدام أحدث التقنيات والميزات سهلة الاستخدام.

T2100 Clamp meter for measuring earth resistance directly on earth rods compatible with MacrotestG series instruments

رمز التخزين التعريفي : HP002100
يصنع : HT-INSTRUMENTS
نموذج : T2100

T2100 Clamp meter for measuring earth resistance directly on earth rods compatible with MacrotestG series instruments

T2100 is a professional clamp specially developed to evaluate resistance of earth rods with no need to disconnect any part of the system.The inner part of the device is made of 2 jaws, one for current reading and the other for voltage generation. The voltage jaws generate a potential (E) on the loop during resistance (R) measurement. A current (I) is consequently generated on the loop and is measured by the current jaws. Based on the value of parameters E and I, the instrument displays the resistance R value calculated as their ratio. The value measured by the device can be used in case the single rods do not influence each other. This device complies with standard IEC/EN61010-1 in CAT III 600V, CAT IV 300V and it is the ideal solution for measurements to be carried out both in private and in industrial environments.

Clamp meter form easuring earth resistance directly on earth rods compatible with MacrotestG series instruments
TRMS

Yes

Direct measurement on earth probes without any cable interruption

Yes

Serial interface RS-232 for connection to devices of Macrotest

Yes

Internal memory for measured data saving

99 locations

LCD display

Yes

Backlight

Yes

Auto Power OFF

Yes

Protection category

CAT III 150V

Size (LxWx H) (mm)

293x90x66

Weight in grams (batteries included)

1300

Guidelines

CE MARK
EMC: IEC/EN61326
IEC/EN61010-032
IEC/EN61010-1
IEC/EN61010-2
IEC/EN61557-4

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

T2100 Clamp meter for measuring earth resistance directly on earth rods compatible with MacrotestG series instruments

T2100 is a professional clamp specially developed to evaluate resistance of earth rods with no need to disconnect any part of the system.The inner part of the device is made of 2 jaws, one for current reading and the other for voltage generation. The voltage jaws generate a potential (E) on the loop during resistance (R) measurement. A current (I) is consequently generated on the loop and is measured by the current jaws. Based on the value of parameters E and I, the instrument displays the resistance R value calculated as their ratio. The value measured by the device can be used in case the single rods do not influence each other. This device complies with standard IEC/EN61010-1 in CAT III 600V, CAT IV 300V and it is the ideal solution for measurements to be carried out both in private and in industrial environments.

Clamp meter form easuring earth resistance directly on earth rods compatible with MacrotestG series instruments
TRMS

Yes

Direct measurement on earth probes without any cable interruption

Yes

Serial interface RS-232 for connection to devices of Macrotest

Yes

Internal memory for measured data saving

99 locations

LCD display

Yes

Backlight

Yes

Auto Power OFF

Yes

Protection category

CAT III 150V

Size (LxWx H) (mm)

293x90x66

Weight in grams (batteries included)

1300

Guidelines

CE MARK
EMC: IEC/EN61326
IEC/EN61010-032
IEC/EN61010-1
IEC/EN61010-2
IEC/EN61557-4

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

قارن بين المنتجات

{"one"=>"حدد 2 أو 3 عناصر للمقارنة", "other"=>"تم اختيار {{ count }} من 3 عناصر"}

حدد العنصر الأول للمقارنة

حدد العنصر الثاني للمقارنة

حدد العنصر الثالث للمقارنة

يقارن